Aoneky 1 in DIY Golf Frame Corner Kit for 10x10x10ft Practice Golf Cage Net - Fits 34 EMTs

Aoneky 34 in DIY Golf Frame Corner Kit for Practice Golf Cage Net The Aoneky 34 in DIY Golf Frame Corner Kit for Practice Golf Cage Net seems to have mixed reception from customers. While some customers found it easy to put together and sturdy enough for their needs, others faced issues with the size of the connectors and the quality of the hardware. One customer mentioned that the fittings were too big for 1/2 inch EMT tubes and had to purchase 3/4 inch electrical conduit pipes instead. They found these to be a better fit and more sturdy. Another customer also noted that the kit requires pipes with an outer diameter of 1 inch, which might not be readily available at local hardware stores. On the other hand, a customer found the kit to be of good quality but raised concerns about the poor quality of some of the hardware, including recycled materials being visible. Another customer mentioned that the tubing could be stronger as it bent when tightening around the pipe. Additionally, one customer experienced a broken nut from the weld when hand tightening. Despite these issues, some customers were able to successfully assemble the kit themselves and use it for their golf simulator setup. They mentioned using additional materials such as the aikeec Indoor Golf Simulator Impact Screen and Polyester Backdrop Drapes to complete their setup. Overall, the Aoneky 34 in DIY Golf Frame Corner Kit for Practice Golf Cage Net seems to have potential but falls short in terms of size compatibility and hardware quality. Customers may need to purchase additional materials and be cautious of potential weaknesses in the product.